From the Workshop

The new 3D printing facility opened by Hyundai and Kia at the Namyang R&D center shows why additive manufacturing is becoming a permanent part of automotive workflows, from prototypes to [...]

Makr3D’s new instant quote system, which does not require an account, stands out in 3D printing pricing because it relies on real slicing data and 3MF fidelity.

We compared PETG and TPC in terms of purpose, flexibility, impact, heat, outdoor use, and ease of printing.

The ASTRA Scout lunar rover, developed with support from Xenia Materials’ 3DF filaments, is once again highlighting why weight reduction and correct material selection are critical in FDM parts.

Wall count is often a more critical strength parameter than infill density in FDM printing, and here we explain with practical examples when a part needs 2, 3, 4, or more walls.

Boom Supersonic’s 92% cost reduction in drill guide production with Stratasys FDM shows why 3D printing is rapidly gaining ground in fixtures and production aids in aerospace.

Kupros’s Cu29 conductive copper-based filament is bringing the idea of producing embedded sensors and conductive traces with FDM back into the spotlight.

According to 3Druck.com's August 6, 2026 report, Fila Edge brings together serial production, quality control, and European shipping in a single workflow with an FDM farm of more than 3,000 printers.

Airbus qualifying the ROBOZE ARGO 500 HYPERSPEED platform with ULTEM 9085 for flight-ready secondary structural parts marks a new threshold of confidence in FDM-based high-performance polymer [...]

HP’s new Industrial Filament 600 HT system aims to bring high-temperature engineering filaments into a more controlled FDM production workflow.