Knowledge Center

The same 3D file placed on the print bed at different angles produces completely different results. We explain how orientation determines the strength, surface quality, and support triangle of [...]

If you're dealing with prints that warp at the corners or pop off the bed mid-print, the solution is often in the design. Here's how to improve first layer adhesion with brim, mouse ear, and [...]

Choosing the right module, tooth count, and clearance values when designing gears for FDM printing determines whether your gear runs quietly and reliably. A practical design guide.

A practical monthly maintenance checklist to keep your FDM 3D printer in top condition and prevent costly breakdowns.

Minimum line width, height, and font choice are decisive for crisp embossed text and logos on 3D-printed parts. A practical FDM dimension guide.

The nozzle diameter determines the thinnest wall and the smallest detail you can print in FDM. We explain how to manage this limitation in your design.

We explain the design logic for splitting large models that don't fit the print bed into parts, then joining them solidly with dowels and interlocking surfaces.

Z-banding causes repeating horizontal lines or ripples on the side surfaces of 3D prints — learn the mechanical and thermal causes and how to fix them.

We share the angle and orientation rules for achieving clean inner surfaces on conical holes and funnels without using any supports.

Rounded corner or beveled edge? We explain how to choose between fillet and chamfer based on structural strength and printability.